#additivemanufacturing
Advertisement
A beautiful Deadpool model made by @eastman3d  For this print I choose @3d_prima PrimaSELECT PLA Metallic Red. And I must say, it turned out freakin awesome 

I scaled up to 130 procent and it stands 255 mm tall. The only thing I regret afterwards is that I didn't start with a black base and then do a simple color change to the metallic red.

Myminifactory: mmf.io/o/81435
Filament: https://www.3dprima.com/se/filament/primaselect-pla-1-75mm-750-g-metallic-roed/a-23479/

#deadpool #marvel #mcu #3dprinter #3dprinting #filament #makerswillmake #happymaking #happyprinting #3dprima #additivemanufacturing #simplify3d #myminifactory #creality
Nirtech Solutions - @nirtech Instagram Profile - inst4gram.com
nirtech
0

A beautiful Deadpool model made by @eastman3d For this print I choose @3d_prima PrimaSELECT PLA Metallic Red. And I must say, it turned out freakin awesome I scaled up to 130 procent and it stands 255 mm tall. The only thing I regret afterwards is

Karlskrona, Sweden
I hope everybody has a similar sunny  day as we here in Munich ️ Remember, the undecided among you have less than 20 hours to register on http://erecoin.io  to get the 30% discount. But, the 20% from tomorrow 10 o’clock on are not that bad either  
https://erecoin.io/  #Erecoin #3DPrinting #ico #additivemanufacturing #blockchaintechnology #cryptocurrency #blockchain #eth #btc
Walid Khelil - @walid_kh87 Instagram Profile - inst4gram.com
walid_kh87
0

I hope everybody has a similar sunny day as we here in Munich ️ Remember, the undecided among you have less than 20 hours to register on http://erecoin.io to get the 30% discount. But, the 20% from tomorrow 10 o’clock on are not that bad either h

The company gives the chance to dYouble Your coins! Moreover, the company is committed to Your best results and strive to become the head of the market! Great project, great product, great team!#Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency
Lucy Kristina - @lucy.kristina12 Instagram Profile - inst4gram.com
lucy.kristina12
0

The company gives the chance to dYouble Your coins! Moreover, the company is committed to Your best results and strive to become the head of the market! Great project, great product, great team!#erecoin #3dprinting #ico #additivemanufacturing #blockc

The company gives the chance to dYouble Your coins! Moreover, the company is committed to Your best results and strive to become the head of the market! Great project, great product, great team!#Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency
Emily liam - @emilyliam6 Instagram Profile - inst4gram.com
emilyliam6
0

The company gives the chance to dYouble Your coins! Moreover, the company is committed to Your best results and strive to become the head of the market! Great project, great product, great team!#erecoin #3dprinting #ico #additivemanufacturing #blockc

Advertisement
The company gives the chance to dYouble Your coins! Moreover, the company is committed to Your best results and strive to become the head of the market! Great project, great product, great team!#Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency
Lilianalessie - @lilianalessie01 Instagram Profile - inst4gram.com
lilianalessie01
0

The company gives the chance to dYouble Your coins! Moreover, the company is committed to Your best results and strive to become the head of the market! Great project, great product, great team!#erecoin #3dprinting #ico #additivemanufacturing #blockc

Dash-CAE
Established in 2006, we offer F1 inspired Engineering without the costs. Link in bio.
#carsofinstagram
#additivemanufacturing
#carbonfibre
#engineering
#aerospaceengineering
#composites
#3dprinting
Dash-CAE - @dashcaeofficial Instagram Profile - inst4gram.com
dashcaeofficial
0

Dash-CAE Established in 2006, we offer F1 inspired Engineering without the costs. Link in bio. #carsofinstagram #additivemanufacturing #carbonfibre #engineering #aerospaceengineering #composites #3dprinting

Dash-CAE
Advertisement
A nonprofit organization advocating for safe trading of medicines & fighting against counterfeit drugs through technology  www.TradePharmaFoundation.org #marketplace #trading #medicines #ai #blockchain #iot #additivemanufacturing #ar #vr #robotics #ethereum #dapps #pharmaceuticalindustry #counterfeiting #compliance  #charity #grantmaking #nonprofit #ambassadorprogram
The Trade Pharma Foundation - @the.trade.pharma.foundation Instagram Profile - inst4gram.com
the.trade.pharma.foundation
1

A nonprofit organization advocating for safe trading of medicines & fighting against counterfeit drugs through technology www.TradePharmaFoundation.org #marketplace #trading #medicines #ai #blockchain #iot #additivemanufacturing #ar #vr #robotics #e

Comments

@emilduka #emilduka#genadial#facebook#pinterest#magisto#youtube#likecoinpro#movie#video#network#advertising#art20iq#genadial#magnuscapitalcenter#art20iq#mashaandbear

Team Member’s Work: Riyad Joucka
.
Left to right: Shellstar (Hong Kong) A collaboration with Matsys @matsysdesign , Audi Innovation Hub (Dubai), Tutuncka 3D Printed Lamp (Dubai)
-

Riyad Joucka (BArch, MArch AA) @riyad.joucka 
Is a Computational Designer, Entrepreneur and Researcher based in Dubai. He is the Lead Architect and founder of MEAN* @mean.design ‘Middle East Architectural Network’; an Innovative Architecture Practice, and the synergistic counterpart to MEAL* ‘Middle East Architecture Lab’ @meal.build ; An Experimental Design Repository.
.
.
The latest edition of our AA Visiting School workshop is announced for March 29-April 6. We will be investigating the concepts of ‘Stereotomy’ in juxtaposition to ‘Additive Manufacturing’ in the context of Dubai. Join us!
⠇
Additive Stereotomies - AA Visiting School Dubai - AAVSDXB 5.0
⠃
Architectural Association School of Architecture 
AA Visiting School ⠂
Sponsored by: In5 Design In5 Dubai (Hosting avenue), 3D Vinci 3DVinci Creations (Industrial Partner), Raidy Printing Group (Industrial Partner)
⠂
For more information, please visit Link in Bio

#aaschool #aaschoolofarchitecture #aavs #aavisitingschool #aavsdxb #mealbuild #workshop #architecture #design #parametricdesign #parametricism #grasshopper3d #rhino3d #blender #technology #3dprinting #additivemanufacturing #additivestereotomies #aavsdxb5 #archilife #archistudent #research #springbreak #readingweek #uae #ajman #sharjah #abudhabi #dubai #mydubai
𝗠𝗘𝗔𝗟*  ميل - @meal.build Instagram Profile - inst4gram.com
meal.build
0

Team Member’s Work: Riyad Joucka . Left to right: Shellstar (Hong Kong) A collaboration with Matsys @matsysdesign , Audi Innovation Hub (Dubai), Tutuncka 3D Printed Lamp (Dubai) - Riyad Joucka (BArch, MArch AA) @riyad.joucka Is a Computational Desi

🇨🇳What a fruitful show and very interesting discussions about the industrial #AdditiveManufacturing, challenges & solutions at #TCTAsia in China. Today is the last day, so if you missed our booth W4-E16, please feel free to visit us today. Our team is eager to tell you more about our modular & fully automated #MetalFAB1 system, about our new #AgencyAgreement with Sinsun-Tech Corporation and all the latest developments within #AdditiveIndustries 🇨🇳
Metal 3D Printer - MetalFAB1 - @additiveindustries Instagram Profile - inst4gram.com
additiveindustries
0

🇨🇳What a fruitful show and very interesting discussions about the industrial #additivemanufacturing , challenges & solutions at #tctasia in China. Today is the last day, so if you missed our booth W4-E16, please feel free to visit us today. Our team i

Organizing the shop.
Brett Tinius - @the_tinius Instagram Profile - inst4gram.com
the_tinius
1

Organizing the shop.

Comments

@the_tinius #design #additivemanufacturing #3dprinter #3dprint #tiniussaulind #bigger #faster #stronger #designingthefuture #cad #design #designanywhere #designeveryday #tsi

Additive manufacturing, commonly referred to as 3D manufacturing or additive manufacturing, is becoming increasingly important in industry. In particular in prototype construction, in components with a high degree of individualization or components with a complicated geometry, these production methods are used. But also in the production of end products, the extent to which additive manufacturing is used is growing.
#Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency
https://erecoin.io/
@spiderlee1 Instagram Profile - inst4gram.com
spiderlee1
1

Additive manufacturing, commonly referred to as 3D manufacturing or additive manufacturing, is becoming increasingly important in industry. In particular in prototype construction, in components with a high degree of individualization or components w

Comments

@traderpartner Love your page <3

#Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency
https://erecoin.io/

In the growing market for additive manufacturing, many different experts will have to work together in the future to solve constructive challenges. And the data exchange of finished print data between designers, contract manufacturers and users will increase sharply and thus the question of the trust and security of a transaction - in different countries and across national borders.
@spiderlee1 Instagram Profile - inst4gram.com
spiderlee1
1

#erecoin #3dprinting #ico #additivemanufacturing #blockchain #cryptocurrency https://erecoin.io/ In the growing market for additive manufacturing, many different experts will have to work together in the future to solve constructive challenges. And

Comments

@traderpartner Love your page <3

This project will have to change the whole world of cryptocurrency. I am glad that you helped to enter the currency world crypto. This should happen as soon as possible. This demonstrates confidence in the project and strategic planning its development and progress. I wish you big success and great luck.. #Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency https://foundico.com/ico/erecoin.html
Madu Senarathne - @senarathnemadu Instagram Profile - inst4gram.com
senarathnemadu
1

This project will have to change the whole world of cryptocurrency. I am glad that you helped to enter the currency world crypto. This should happen as soon as possible. This demonstrates confidence in the project and strategic planning its developme

Comments

@icecubedx 😀

A good idea and a strong team, closely follow this project, and I believe that this startup will achieve their goals. This is a strong Start-up with a ambitious idea.
#Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency https://foundico.com/ico/erecoin.html
Madu Senarathne - @senarathnemadu Instagram Profile - inst4gram.com
senarathnemadu
3

A good idea and a strong team, closely follow this project, and I believe that this startup will achieve their goals. This is a strong Start-up with a ambitious idea. #erecoin #3dprinting #ico #additivemanufacturing #blockchain #cryptocurrency https:

Comments

@breezytraders Fantastic work! I wish all the best for you and I hope you acheive your goals. Would be appreciated if you have a look at our page, and follow us if you approve our work.

@bitbata 🚀🚀🚀

This will be a new era in the field of cryptocurrencies. Recommended my friends to invest here. Good luck with the project and Everyone should join this project.!!!
#Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency https://foundico.com/ico/erecoin.html
Madu Senarathne - @senarathnemadu Instagram Profile - inst4gram.com
senarathnemadu
0

This will be a new era in the field of cryptocurrencies. Recommended my friends to invest here. Good luck with the project and Everyone should join this project.!!! #erecoin #3dprinting #ico #additivemanufacturing #blockchain #cryptocurrency https://

I am feeling this a very good project. Your company team members are looking very good and strong and the price of your coine goes up too much Thanks..
#Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency https://icobench.com/ico/erecoin
Madu Senarathne - @senarathnemadu Instagram Profile - inst4gram.com
senarathnemadu
0

I am feeling this a very good project. Your company team members are looking very good and strong and the price of your coine goes up too much Thanks.. #erecoin #3dprinting #ico #additivemanufacturing #blockchain #cryptocurrency https://icobench.com/

It is confidence in the future! This is a brilliant project that will be able to achieve the highest results. They are undoubtedly the best. #Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency https://foundico.com/ico/erecoin.html
Madu Senarathne - @senarathnemadu Instagram Profile - inst4gram.com
senarathnemadu
1

It is confidence in the future! This is a brilliant project that will be able to achieve the highest results. They are undoubtedly the best. #erecoin #3dprinting #ico #additivemanufacturing #blockchain #cryptocurrency https://foundico.com/ico/erecoin

Comments

@unpredictablelab 👏👏

Some of you probably are wondering who the faces behind #erecoin are.
One co-founder is the Dipl. Ing. Konstantin Steinmüller, he is the operational head of CAE lab GmbH and is responsible for the technical development of #3Dprinting and #AdditiveManufacturing
Madu Senarathne - @senarathnemadu Instagram Profile - inst4gram.com
senarathnemadu
0

Some of you probably are wondering who the faces behind #erecoin are. One co-founder is the Dipl. Ing. Konstantin Steinmüller, he is the operational head of CAE lab GmbH and is responsible for the technical development of #3dprinting and #additiveman

Hey guys, at February the 18th our big project #erecoin will take the next step! We know our topic #blockchain and #3Dprinting is not uncomplicated, so feel free to ask any questions you might have. #additivemanufacturing #startup #icobench
Madu Senarathne - @senarathnemadu Instagram Profile - inst4gram.com
senarathnemadu
0

Hey guys, at February the 18th our big project #erecoin will take the next step! We know our topic #blockchain and #3dprinting is not uncomplicated, so feel free to ask any questions you might have. #additivemanufacturing #startup #icobench

All the different aspects that play a roll in the additive manufacturing process  to secure every single step #blockchain is needed 

#additivemanufacturing #3dprinting #blockchainsolutions #erecoin #ere #ethereum #platform
Madu Senarathne - @senarathnemadu Instagram Profile - inst4gram.com
senarathnemadu
1

All the different aspects that play a roll in the additive manufacturing process to secure every single step #blockchain is needed #additivemanufacturing #3dprinting #blockchainsolutions #erecoin #ere #ethereum #platform

Comments

@bitninjasupply 🤺 My ninja

Printed on our Fuse 3D Sky Blue PLA with 0.16 layer , 10% infill.

Thing: 2826950

Part 1 : Helical gear cups

#3dprinting #filaments #3dprinter #3dprinted #spool #middleeast #pla #abs #biodegradable #filamentmanufacturer #additivemanufacturing #fdm #3dprintdxb #3dprintingindustry #rapidprototyping #gcc #printedsolid #3dfilamentuae #fuse3d #3dprintinguae #bluepla #prusai3mk3 #matterhackers #additivetech #thingiverse
FUSE 3D - @fuse.3d Instagram Profile - inst4gram.com
fuse.3d
0

Printed on our Fuse 3D Sky Blue PLA with 0.16 layer , 10% infill. Thing: 2826950 Part 1 : Helical gear cups #3dprinting #filaments #3dprinter #3dprinted #spool #middleeast #pla #abs #biodegradable #filamentmanufacturer #additivemanufacturing #fdm

Dubai Industrial City
Approx. 400 youths representing the future of black excellence attended the Black Futures Conference. Thank you Dufferin-Peel Catholic School Board for including Angella Smith @ms_mignon and I as their STEM role models. ,
.
I got to discuss about my work at Cummins and @stemhubfoundation . Then, I answered tough questions about the jobs of the future, which jobs won’t be available in 20 years, how to become an Additive Manufacturing Engineer and a Design Engineer, and challenges I have faced as a woman and a minority in Manufacturing Engineering.

I am hopeful about the future of Canada! I feel useful, I feel proud and I feel extremely thankful ! #WomenInEngineering #PrincessShuri #BlackHistoryMonth #BHM #Engineering #NuclearEngineering #AdditiveManufacturing
Dr. Adeola Olubamiji - @dr_olubamiji Instagram Profile - inst4gram.com
dr_olubamiji
6

Approx. 400 youths representing the future of black excellence attended the Black Futures Conference. Thank you Dufferin-Peel Catholic School Board for including Angella Smith @ms_mignon and I as their STEM role models. , . I got to discuss about my

Comments

@augustineonyeke Congrats ma. I hope to chat wit you later today after Nigerians decide...

@prettymobo Well done sis🙌🙌

🧠Goth Letter Bottle
Get your hopes up! 
Write the letter to the ones you loved.
And he/she will reply back to you.
Contact us how to get the letter bottle.

Size : 10x6x11,5 cm
Weight : 55 gr
Printer : FlashForgeAdventurer 3
Material : eSun PLA+

#flashforgeadventurer3 #flashforge #evolusi3d #3dmaker #toko3d #rapidprototyping #reverseengineering #additivemanufacturing #reengineering #3dscanning #stemeducation #jasa3dprinting #jasa3dscan #3dscaning #3dprinting #3dprinter #3dprintingjakarta #3dprintingindonesia #valentine #love #gift #february #14thfebruary #boyfriend #girlfriend #brain #bottle #lovebottle #letter #loveletter
Evolusi 3D - @evolusi3d Instagram Profile - inst4gram.com
evolusi3d
3

🧠Goth Letter Bottle Get your hopes up! Write the letter to the ones you loved. And he/she will reply back to you. Contact us how to get the letter bottle. Size : 10x6x11,5 cm Weight : 55 gr Printer : FlashForgeAdventurer 3 Material : eSun PLA+ #fl

Comments

@evolusi3d @oyunkolik_gamer thank you so much 👏👏

@3d_learn Niceeeeee!

Over the years we have got pretty good at 3D printing polycarbonate.  A light strong material with a characteristic sparkle.  To do it right you will need a printer with a 130degC heated chamber (not just platform, the entre chamber )  this is to keep the part above glass transition temp, resulting in a strong true to form part.  Or you can just contact us... #3dprint #3dprinting #designers #additivemanufacturing #3dprintingforindustry #nzdesign #nzmade #polycarbonate
Palmer design & manufacturing - @palmerdesign.co.nz Instagram Profile - inst4gram.com
palmerdesign.co.nz
0

Over the years we have got pretty good at 3D printing polycarbonate. A light strong material with a characteristic sparkle. To do it right you will need a printer with a 130degC heated chamber (not just platform, the entre chamber ) this is to kee

Just a little bit of 3D Printing's product
Lithophane
Mr Airlangga Hartarto
Minister of Industry
.
.
.
Printed by 3D Printing Machine
HAL Tech-01 Series
HAL (Home As Laboratory)™
.
.
.
#3dprinting #3dprinter #3dprint #technology #education #3dprintingeducation #3dprintingindonesia #productdesign #manufacture #additivemanufacturing #rapidprototyping #fdm #lithophane #souvenir #fusedepositionmodeling #industrialrevolution
#airlanggahartarto #airlangga #haltech.id #mpick #ugm #ftugm #indonesia
Haltech Indonesia - @haltech.id Instagram Profile - inst4gram.com
haltech.id
0

Just a little bit of 3D Printing's product Lithophane Mr Airlangga Hartarto Minister of Industry . . . Printed by 3D Printing Machine HAL Tech-01 Series HAL (Home As Laboratory)™ . . . #3dprinting #3dprinter #3dprint #technology #education #3dprintin

Fakultas Teknik UGM
Print 53/365
We feel so blessed for having three awesome pieces of machinery.
Our Prusa MK2S & MK3 and our Raise3D N2+ were working almost 24/7, this project; as mentioned in the Print 51, is a request, all these printes will be implemented in a class of a local university that has as purpose to help kids with some psycomotor dificulties, like identifying shapes and colors. The authorized material that is manufactured for this exercises are too expensive, so 3d printing was the solution.
Print these in dual extrusion or using the MMU was not an option, both of these config. take too much time even in the fastest profiles that the slicers have.
So we decided to print half and half of the cubes, made a small cut so we could add a centering piece as a guide.
We have to print 25 kits, right now we're in the kit number 17; that are the ones confirmed and payed. We're now waiting for the remaining. 
We're printing with the 0.35mm profile on the MK2S, 0.2mm Speed on the MK3, and 0.3mm on the N2+, this meant 125 hrs in parallel.
We are proud of how reliable our printers are, and of course we never print without @magigooo 
#3dprynxz #yourideasinyourhands #tusideasentusmanos #3dprinting #fromqueretarocktotheworld 
#mexicansmakingstuff #plafilament #raisethestandard #raise3dn2plus #raise3d #prusamk3 #prusamk2s 
#prusaresearch #originalprusa #steelsheet #flexplate #3dprintingislove #thingiverse #myminifactory 
#cults3d #additivemanufacturing #3ddesign #3dmodel
3D PRYNXZ - @3dprynxz Instagram Profile - inst4gram.com
3dprynxz
0

Print 53/365 We feel so blessed for having three awesome pieces of machinery. Our Prusa MK2S & MK3 and our Raise3D N2+ were working almost 24/7, this project; as mentioned in the Print 51, is a request, all these printes will be implemented in a cl

Why ERECOIN
Solving constructive challenges. And the data exchange of finished print data between designers, contract manufacturers and users will increase sharply and thus the question of the trust and security of a transaction - in different countries and across national borders. https://erecoin.io/ #Erecoin #3DPrinting #ico #additivemanufacturing #blockchain #cryptocurrency
@angelo2425 Instagram Profile - inst4gram.com
angelo2425
1

Why ERECOIN Solving constructive challenges. And the data exchange of finished print data between designers, contract manufacturers and users will increase sharply and thus the question of the trust and security of a transaction - in different countr

Comments

@artquitectural Nice pic, check out our profile and follow us!🏝🏞🏛🏟🏤🏥

Getting ready for the weekend.  3D printer Daft Punk.  #3dprinting #3dprinted #daftpunk #additivemanufacturing #minime #selfi #wow #picoftheday #figurine #figurines #music #3dprintedears #3dfigurine #weddingcaketopper #weddintopper #color3dprinting #rapidscan3d
rapidscan3d - @rapidscan3d Instagram Profile - inst4gram.com
rapidscan3d
3

Getting ready for the weekend. 3D printer Daft Punk. #3dprinting #3dprinted #daftpunk #additivemanufacturing #minime #selfi #wow #picoftheday #figurine #figurines #music #3dprintedears #3dfigurine #weddingcaketopper #weddintopper #color3dprinting #

Comments

@cunicode nice!⚡️

@3d_learn Very good photo because of the composition. I think just need some lighting in this photo then great! 😉

3D printing allows us to minimize the manufacturing time, so we can learn more from our hot fire tests faster. James is currently getting the finishing touches necessary after printing.

#usclpl #usc #viterbi #additivemanufacturing #3dprinting #propulsion #liquidpropulsionlaboratory
USC Liquid Propulsion Lab - @usclpl Instagram Profile - inst4gram.com
usclpl
2

3D printing allows us to minimize the manufacturing time, so we can learn more from our hot fire tests faster. James is currently getting the finishing touches necessary after printing. #usclpl #usc #viterbi #additivemanufacturing #3dprinting #propu

Comments

@atticusvadera 🐐

@gonski20 🐐🐐🐐

Most extreme print I have ever done, and it's not even finished yet after 2 days of printing. It took around 5 hours of preparation to get this print going, and I can't wait to see if the hardest parts will print great!
·
·
·
#additivemanufacturing #3dprintedmodels #design #3dmodel #filament #art #maker #3dprints #3dprinters #3d #3dprinted #3dprinting #3dprintingservice #3dprintinglife #3dprintingindustry #3dprintingworld #3dprintingcommunity #3dprintingmodel #3dprintingservices #3dprintingfilament #3dprintingshop #3dprintingstudio #3dprintingideas #3dprintingday #3dprintingpen #3dprint #3dprintingceramics #3dprinter #3dprintingexperience #3dprintingnerd
PB40k - @pb40k Instagram Profile - inst4gram.com
pb40k
1

Most extreme print I have ever done, and it's not even finished yet after 2 days of printing. It took around 5 hours of preparation to get this print going, and I can't wait to see if the hardest parts will print great! · · · #additivemanufacturing #

Comments

@unpredictablelab 👍👍

Make anything... #additivemanufacturing
ezra - @ezraelsen Instagram Profile - inst4gram.com
ezraelsen
0

Make anything... #additivemanufacturing

Ooh nice overhang going on there. No support needed. Testing a basic 0.5mm brass nozzle with 0.4 settings on the gMax 2. The print is The Colonel thing: 108867. It is printed at 25% scale and we were just running a basic test. The fan shroud you see on the gMax is printed in CF-PETG by @therealatomicfilament . Love that stuff!
gCreate3d - @gcreate3d Instagram Profile - inst4gram.com
gcreate3d
5

Ooh nice overhang going on there. No support needed. Testing a basic 0.5mm brass nozzle with 0.4 settings on the gMax 2. The print is The Colonel thing: 108867. It is printed at 25% scale and we were just running a basic test. The fan shroud you see

Gcreate HQ
Comments

@3dbuiltpartsdotcom Will have linears soon.... nice job btw 👍

@hot_mech Please help me 🙏 i sen DM

(Post 5 of 5)...On a recent trip with our middle and high school students we all challenged or extended some of our accepted ideas. It was a rewarding experience to find out more about the world and ourselves as we crossed the White Sands of New Mexico, a chilly Chihuahuan desert and a diverse area around Nuevo Casas Grandes. 
As a side note, my students now know I can do front flips and have a serious face. They already knew I had a lot of silly faces. 🤪 🇺🇸🇲🇽 #freedomfriday  #education #stem #steam  #projectbasedlearning #stemeducation #stemlab #21stcenturyclassroom #additivemanufacturing #makerspace #steamlab #whitesandsnationalmonument #nuevocasasgrandes #mexico #paquime #casasgrandes #internationalstudents
Christopher Dastan - @chris.dastan Instagram Profile - inst4gram.com
chris.dastan
0

(Post 5 of 5)...On a recent trip with our middle and high school students we all challenged or extended some of our accepted ideas. It was a rewarding experience to find out more about the world and ourselves as we crossed the White Sands of New Mexi

(Post 4 of 5)...On a recent trip with our middle and high school students we all challenged or extended some of our accepted ideas. It was a rewarding experience to find out more about the world and ourselves as we crossed the White Sands of New Mexico, a chilly Chihuahuan desert and a diverse area around Nuevo Casas Grandes. 
As a side note, my students now know I can do front flips and have a serious face. They already knew I had a lot of silly faces. 🤪 🇺🇸🇲🇽 #freedomfriday  #education #stem #steam  #projectbasedlearning #stemeducation #stemlab #21stcenturyclassroom #additivemanufacturing #makerspace #steamlab #whitesandsnationalmonument #nuevocasasgrandes #mexico #paquime #casasgrandes #internationalstudents
Christopher Dastan - @chris.dastan Instagram Profile - inst4gram.com
chris.dastan
1

(Post 4 of 5)...On a recent trip with our middle and high school students we all challenged or extended some of our accepted ideas. It was a rewarding experience to find out more about the world and ourselves as we crossed the White Sands of New Mexi

Comments

@gamekeymeta looks nice

My friends from @visionminer send me some High Temprature Nano Polymer Adhesive buildplate glue so it's time to put it to the test. Some materials are just not printable without a good adhesive to make it stick to the bed so i'm curious to see what this material can do.

#3dprinting #3dprintingcommunity #3dp #visionminer #nanopolymeradhesive #buildplateglue #makerslife #makergram #makersgonnamake #makersmovement #creative #technology #additive #additivemanufacturing #de3dprintman
De 3D Printman - @de3dprintman Instagram Profile - inst4gram.com
de3dprintman
4

My friends from @visionminer send me some High Temprature Nano Polymer Adhesive buildplate glue so it's time to put it to the test. Some materials are just not printable without a good adhesive to make it stick to the bed so i'm curious to see what t

Amsterdam, Netherlands
Comments

@3d_baski_ve_anahtarlik This is a good picture but I don’t know if it is because of good lighting or place… maybe composition 😉👍

@j3dk_print Uooh you are lucky man 😜 this product is awesome 😍

Just a little bit of 3D Printing's product
Lithophane
Mrs Retno Marsudi
Foreign Minister of Indonesia
.
.
Printed by 3D Printing Machine
HAL Tech-01 Series
HAL (Home As Laboratory)™ .
.
#3dprinting #3dprinter #3dprint #technology #education #3dprintingeducation #3dprintingindonesia #productdesign #manufacture #additivemanufacturing #rapidprototyping #fdm #lithophane #fusedepositionmodeling #industrialrevolution
#retnomarsudi #foreign #haltech.id #mpick #ugm #ftugm #indonesia
Haltech Indonesia - @haltech.id Instagram Profile - inst4gram.com
haltech.id
0

Just a little bit of 3D Printing's product Lithophane Mrs Retno Marsudi Foreign Minister of Indonesia . . Printed by 3D Printing Machine HAL Tech-01 Series HAL (Home As Laboratory)™ . . #3dprinting #3dprinter #3dprint #technology #education #3dprinti

Yogyakarta
It's exciting to see companies in the 3D space continually innovating in ways to support the professional 3D printing workflow. “Ultimaker Introduces New Platform Services with Ultimaker Cloud” ⠀
⠀
#3dprinting #additivemanufacturing #Ultimaker #UltimakerCloud #professional3Dprinting #innovation #BeckattSolutions⠀
⠀
https://buff.ly/2NtMvXX
Beckatt Solutions - @beckatt3d Instagram Profile - inst4gram.com
beckatt3d
0

It's exciting to see companies in the 3D space continually innovating in ways to support the professional 3D printing workflow. “Ultimaker Introduces New Platform Services with Ultimaker Cloud” ⠀ ⠀ #3dprinting #additivemanufacturing #ultimaker #ultim

Posted @withrepost • @ursamajortech Everyone carries the load here. We all share the highest of highs, but we share the lowest of lows, too. Plus, there's a lot of fire. -Audrey, Office Manager Extraordinaire .
.
.

#hadley #ripley #ursamajortech #rocketengine #rocketscience #additivemanufacturing #startup #aerospace #engineering #engines #3Dprinting #3dprint #exploreouterspace #coloradolife #aerospaceindustry #teamwork #teamworkmakesthedreamwork #strongtogether #workfamily #fiery #hotstuff
Magnolia Space Studios - @magnolia.space.studios Instagram Profile - inst4gram.com
magnolia.space.studios
0

Posted @withrepost@ursamajortech "Everyone carries the load here. We all share the highest of highs, but we share the lowest of lows, too. Plus, there's a lot of fire." -Audrey, Office Manager Extraordinaire . . . #hadley #ripley #ursamajortech #

#uniprinter3d #AdditiveManufacturing #3DP Dan Wellers, Digital Futures Lead at SAP “3D Printing will Expand into 4D Printing” https://goo.gl/MB46z4
UniPrinter3D - @uniprinter3d Instagram Profile - inst4gram.com
uniprinter3d
0

#uniprinter3d #additivemanufacturing #3dp Dan Wellers, Digital Futures Lead at SAP “3D Printing will Expand into 4D Printing” https://goo.gl/MB46z4

Getting some gifts ready, second part of this print. I will post the completed print when I'm ready with it. :)
I must say that I'm real happy with my Tornado now, it prints so well, and the Bronze filament is looking great too!

Printers used: @tevo3dprinterofficial Tornado

Filament used: @fillamentum
@3d_prima Bronze PLA

Settings: 0,2 layer height, 215C on hotend, 60C on heatbed
3D Print Viking - @3dprintviking Instagram Profile - inst4gram.com
3dprintviking
2

Getting some gifts ready, second part of this print. I will post the completed print when I'm ready with it. :) I must say that I'm real happy with my Tornado now, it prints so well, and the Bronze filament is looking great too! Printers used: @tevo

Sandefjord, Norway
Comments

@3dprintviking #instatechnology #technology #tech #newtechnology #design #print #3dprint #3dprinting #3dprinted #filament #filaments #maker #printing #additivemanufacturing #future #3dmaker #3dprinter #3dmodel #druk3d #thingiverse #3d #3dhubs #prototyping #3dprintinglife #stampa3d #manufacturing #rapidprototyping

@shawtechs Your Chanel is great ,i like .Come check my channel 💢💢

Procurando por praticidade? Essa é a impressora perfeita! A Ender 2 é uma máquina compacta, pesando apenas 4 kg, pode ser transportada com muita facilidade. Além disso, uma das suas características é a agilidade e precisão! Surpreenda seus clientes, leve ela para qualquer lugar! :) Acesse nosso site agora mesmo e adquira a sua por apenas R$ 1.800,00. Todos os produtos da @slim.3d estão disponíveis a pronta entrega com certificados da Creality, garantia de 6 meses e o melhor pós venda do mercado!
.
#slim3dimpressoras #impressora3d #impressao3d #3dprinter #diy #maker #tecnologia3d #filamento #manufaturaaditiva #petg #pla #3dprinting #additivemanufacturing #stl #thingiverse  #3dprint  #design #impressão3d #impressoras3d  #print3d #filament #promo #promoslim #promocao #creality #ender2
SLIM 3D IMPRESSORAS - @slim.3d Instagram Profile - inst4gram.com
slim.3d
2

Procurando por praticidade? Essa é a impressora perfeita! A Ender 2 é uma máquina compacta, pesando apenas 4 kg, pode ser transportada com muita facilidade. Além disso, uma das suas características é a agilidade e precisão! Surpreenda seus clientes,

Comments

@diefavero @adilsongody essa é aquela que comentei com você...

@adilsongody Barata heim mano

Read #TCTMagazine's interview with #Farsoon's founder, Dr. Xu Xiaoshu, on the new #FlightTechnology displayed at #TCTAsia! Read More: https://www.tctmagazine.com/3d-printing-news/farsoon-introduces-new-high-speed-sintering-at-tct-asia-2019/
.
.
.
.
.
.
.
.
.
.
.
.
.
#FibreLaser #Laser #Polymers #Plastic #PLS #PlasticLaserSintering #PolymerLaserSintering #AdditiveManufacturing #AdditiveMFG #OpenForIndustry  #FarsoonTechnologies #LaserSintering #Innovations #Farsoon
Farsoon Technologies-Americas - @farsoonamericas Instagram Profile - inst4gram.com
farsoonamericas
0

Read #tctmagazine 's interview with #farsoon 's founder, Dr. Xu Xiaoshu, on the new #flighttechnology displayed at #tctasia ! Read More: https://www.tctmagazine.com/3d-printing-news/farsoon-introduces-new-high-speed-sintering-at-tct-asia-2019/ . . . . .

SNIEC
The cutest print we make and the one that never lasts longer than a day on display.. .. Add a lil YOU on your working desk.. ..!! Pimp up any and everything.. get em customized to what ever you want on em...!! your logo, message, quote, characters, art work, steam punk, PHOOL PATTE .. aNyTHING  ... T3D  taking customized gifts to a new level- Impossible is nothing. 
#MAKEANYTHING
#vadodara #instatechnology #instadesign #instaiot #technology #news #iot #tech #architecture #3dprinting #manufacturing #students #future #pla #innovation #today #filament #additivemanufacturing #india #prototyping #ourvadodara #art #design #decor
#interiordesign #goldenangle #lampshade #customisedgifts #personalisedgifts
The 3rd Dimension - @3dprintingvadodara Instagram Profile - inst4gram.com
3dprintingvadodara
1

The cutest print we make and the one that never lasts longer than a day on display.. .. Add a lil "YOU" on your working desk.. ..!! Pimp up any and everything.. get em customized to what ever you want on em...!! your logo, message, quote, characters,

The Emperor
Comments

@shawtechs Ta chaine est super , n'hésite pas a faire un tous sur la mienne.

The cutest print we make and the one that never lasts longer than a day on display.. .. Add a lil YOU on your working desk.. ..!! Pimp up any and everything.. get em customized to what ever you want on em...!! your logo, message, quote, characters, art work, steam punk, PHOOL PATTE .. aNyTHING  ... T3D  taking customized gifts to a new level- Impossible is nothing. 
#MAKEANYTHING
#vadodara #instatechnology #instadesign #instaiot #technology #news #iot #tech #architecture #3dprinting #manufacturing #students #future #pla #innovation #today #filament #additivemanufacturing #india #prototyping #ourvadodara #art #design #decor
#interiordesign #goldenangle #lampshade #customisedgifts #personalisedgifts
The 3rd Dimension - @3dprintingvadodara Instagram Profile - inst4gram.com
3dprintingvadodara
1

The cutest print we make and the one that never lasts longer than a day on display.. .. Add a lil "YOU" on your working desk.. ..!! Pimp up any and everything.. get em customized to what ever you want on em...!! your logo, message, quote, characters,

The Emperor
Comments

@knowledgespy 👌👌Thats Cool 😃

#Repost @dasinnovations
Amazing dragon sculpture! A +24 hour, well worth the wait.

Printed with @filaments.ca red PLA

https://www.thingiverse.com/thing:591330

@thingiverse @myminifactory
#3dprinting #3dprinter #3dmodel #3dprints #printallthethings #madeincanada #canada #tech #art #kelowna #westkelowna #penticton #okanagan #additivemanufacturing #art #rapidprototyping #prototyping #makeit3d #ilove3dprinting #anythingispossible #thingiverse #technology #maker #diy #dragons
3D Filaments Canada - @filaments.ca Instagram Profile - inst4gram.com
filaments.ca
1

#repost @dasinnovations Amazing dragon sculpture! A +24 hour, well worth the wait. Printed with @filaments.ca red PLA https://www.thingiverse.com/thing:591330 @thingiverse @myminifactory #3dprinting #3dprinter #3dmodel #3dprints #printallthethings

Comments

@unpredictablelab 👏👏

PSU — Polysulfonr. 380C on the nozzle and the heated chamber — this stuff feels like metal. Incredible.
Vision Miner - @visionminer Instagram Profile - inst4gram.com
visionminer
3

PSU — Polysulfonr. 380C on the nozzle and the heated chamber — this stuff feels like metal. Incredible.

Vision Miner
Comments

@digitalbusinessstrategy A simple turn-key system that work for you.

@3dbuiltpartsdotcom Damn sounds crazy!

Success! The lampshade retention ring fits and holds nicely. On to the next design! :)
=
#makersmovement #makersgonnamake #3dprinting #3dprinter #3dprinted #design #technology
#tech #makedontbuy #impression3d #impresion3d #impresora3d #manufactur3d #additivemanufacturing
#3dprinterworld #3dprintinglife #3dprintedmodels #rapidprototyping #prusa
#prusai3 #prusai3mk3 #reprap #maker #makers #thingiverse #makerspace #replacementparts 
#lighting_design #lampwork
melt.burn.make - @melt.burn.make Instagram Profile - inst4gram.com
melt.burn.make
1

Success! The lampshade retention ring fits and holds nicely. On to the next design! :) = #makersmovement #makersgonnamake #3dprinting #3dprinter #3dprinted #design #technology #tech #makedontbuy #impression3d #impresion3d #impresora3d #manufactur3d

Comments

@exquisitehomeinteriors Totally awesome💘 Wanna be featured on our page? DM me!

So I might be mildly obsessed with 3D printing now you guys.
Brian Merwin - @brianmerwinimaging Instagram Profile - inst4gram.com
brianmerwinimaging
8

So I might be mildly obsessed with 3D printing now you guys.

Atlanta, Georgia
Comments

@wolkphoto @brianmerwinimaging I’ve been wanting to learn it. Was planning on buying one to make hands for Grey, but he didn’t like the robohand we got for him. 🤷‍♀️

@pelhamdra Wow too cool!

Today's Make Of The Day is Flexi-rex with Stronger Links Keychain by DEJello on Thingverse! Check it out!

___________________________________________

#locallymade #makersgonnamake #photooftheday #picoftheday #makeoftheday #instagood #instalike #3dprinting #algoma #awesome #fun #like #makernorth #local #canada #additivemanufacturing #love #cool #future #amazing
_____________________________________________
Maker North - @makernorth Instagram Profile - inst4gram.com
makernorth
0

Today's Make Of The Day is "Flexi-rex with Stronger Links Keychain" by DEJello on Thingverse! Check it out! ___________________________________________ #locallymade #makersgonnamake #photooftheday #picoftheday #makeoftheday #instagood #instalike #3

The doors are off as another #Thermwood 10'x20' #LSAM is being packed up to ship out!  Really cool plans for this particular LSAM by its new owner...stay tuned for more info in the future!

In the last year, our LSAM #additive manufacturing systems were the clear market leaders in the sale of large scale #3Dprinting systems for thermoplastic composite materials, selling virtually all systems in the US during the year!

#additivemanufacturing #3dprint
Thermwood - @thermwood Instagram Profile - inst4gram.com
thermwood
1

The doors are off as another #thermwood 10'x20' #lsam is being packed up to ship out! Really cool plans for this particular LSAM by its new owner...stay tuned for more info in the future! In the last year, our LSAM #additive manufacturing systems w

Thermwood Corporation
Comments

@mudaseem 🙌🙌🙌 great work. Shes a beauty

Our Markforged 3D printer is hard at work today!#advocate3d  #3dprinting #markforged #composites #additivemanufacturing
Advocate3D - @advocate3d Instagram Profile - inst4gram.com
advocate3d
0

Our Markforged 3D printer is hard at work today!#advocate3d #3dprinting #markforged #composites #additivemanufacturing

Advocate3D
Amazing dragon sculpture! A +24 hour, well worth the wait.

Printed with @filaments.ca red PLA

https://www.thingiverse.com/thing:591330

@thingiverse @myminifactory
#3dprinting #3dprinter #3dmodel #3dprints #printallthethings #madeincanada #canada #tech #art #kelowna #westkelowna #penticton #okanagan #additivemanufacturing #art #rapidprototyping #prototyping #makeit3d #ilove3dprinting #anythingispossible #thingiverse #technology #maker #diy #dragons
Das Innovations - @dasinnovations Instagram Profile - inst4gram.com
dasinnovations
3

Amazing dragon sculpture! A +24 hour, well worth the wait. Printed with @filaments.ca red PLA https://www.thingiverse.com/thing:591330 @thingiverse @myminifactory #3dprinting #3dprinter #3dmodel #3dprints #printallthethings #madeincanada #canada #

Comments

@websessions Love Motivated People! 👍 Keep the posts coming, love to see more.

@3d_sekicaivana Brilliant print and so cool color 🤩

Tandis qu’ils regardent dans une direction, j’explore les onze dimensions. Collaboration avec @sho_konishi #art #design #3dart #fashion #jewelry #additivemanufacturing #future #organic #sustainablefashion #fractals #3dmodeling #hautecouture #3dart
Alejandro Delgado - @alejandrodelgado3d Instagram Profile - inst4gram.com
alejandrodelgado3d
0

Tandis qu’ils regardent dans une direction, j’explore les onze dimensions. Collaboration avec @sho_konishi #art #design #3dart #fashion #jewelry #additivemanufacturing #future #organic #sustainablefashion #fractals #3dmodeling #hautecouture #3dart

Material: TPE - #addifab #industrial3dprinter. Injection moulded components. .
.
.
#additivemanufacturing #injectionmolding #freeforminjectionmolding #engineering #chemistry #awesome #3dprinting #industry40 #manufacturing
AddiFab - @addifab Instagram Profile - inst4gram.com
addifab
1

Material: TPE - #addifab #industrial3dprinter . Injection moulded components. . . . #additivemanufacturing #injectionmolding #freeforminjectionmolding #engineering #chemistry #awesome #3dprinting #industry40 #manufacturing

Comments

@artquitectural Nice pic, check out our profile and follow us!🏝🏞🏛🏟🏤🏥

3D Printed Pistation looks insanely beautiful as it made using #resin #uvlight #formlabs 
Great print quality!!!
3Ducators - @3ducatorsusa Instagram Profile - inst4gram.com
3ducatorsusa
1

3D Printed Pistation looks insanely beautiful as it made using #resin #uvlight #formlabs Great print quality!!!

Maker Depot
Comments

@3ducatorsusa #3D #3dprinting #3dprinted #3dprinter #3dprints #3dmodel #design #3dprinters #design #3dfilament #thingiverse #pla #myminifactory #additivemanufacturing #blogging #instagramblog #igblogger #science #learning #tech #stem #3ducators #3dprintingunitedstates #quality

Lumi Industries’ Text to Braille Converter is a heartening use of open source software.
.
Read the full story on Fabbaloo.com
.
#additivemanufacturing #3dprinting #braille
Fabbaloo - @fabbaloo Instagram Profile - inst4gram.com
fabbaloo
0

Lumi Industries’ Text to Braille Converter is a heartening use of open source software. . Read the full story on Fabbaloo.com . #additivemanufacturing #3dprinting #braille

A company is marketing a “diamond” 3D printer filament.
.
Read the full story on Fabbaloo.com
.
#additivemanufacturing #3dprinting #materials #diamonds #filament
Fabbaloo - @fabbaloo Instagram Profile - inst4gram.com
fabbaloo
0

A company is marketing a “diamond” 3D printer filament. . Read the full story on Fabbaloo.com . #additivemanufacturing #3dprinting #materials #diamonds #filament

I bought a 3D printer and I can’t wait to put it together this weekend. 🤓 I couldn’t wait so I had these parts printed at the local library!! The girl at the desk was like what do you use a 3D printer for..My response in my head: Make money. Don’t sleep on the library! Use your resources. These pieces are going to make final result easy. My weekend just got awesome!//
#additivemanufacturing #imsofocused #inbusiness #3d #3DPrinting #3dprinted #manufacturing #prototyping
Evelina Monroe - @evelinamonroe Instagram Profile - inst4gram.com
evelinamonroe
0

I bought a 3D printer and I can’t wait to put it together this weekend. 🤓 I couldn’t wait so I had these parts printed at the local library!! The girl at the desk was like what do you use a 3D printer for..My response in my head: Make money. Don’t sl

This awesome Triangle Ripple Vase by @brithawkes (@myminifactory object:83147) in the stunning copper elixir pla by @polyalchemy is printed on the Original Prusa i3 MK3 by @josefprusa. Sliced in Slic3rPE in Vase Mode and 0,2 mm layers.

#3dprinting #3dprintingcommunity #3dp #brithawkes #myminifactory #polyalchemy #elixirpla #prusa #prusa3d #prusai3mk3 #makersmovement #makerslife #makergram #maker #additive #additivemanufacturing #de3dprintman
De 3D Printman - @de3dprintman Instagram Profile - inst4gram.com
de3dprintman
17

This awesome Triangle Ripple Vase by @brithawkes (@myminifactory object:83147) in the stunning copper elixir pla by @polyalchemy is printed on the Original Prusa i3 MK3 by @josefprusa. Sliced in Slic3rPE in Vase Mode and 0,2 mm layers. #3dprinting #

Amsterdam, Netherlands
Comments

@3d.passion Dope! 👍🏻

@brithawkes 😍😍😍😍😍love the colour

Thanks for the amazing evening @medinnovationexchange and everyone who contributed to making the first MedTech Mega Mixer a success! We had a great time educating about how 3D Printing & Additive Manufacturing can be used in the Medical industry! #3dprinting #3dprint #additivemanufacturing #carbon #multijetfusion #dls #polyjet #sla #hearts #medical #med #biomedicalengineering #biotech #biotechnology #shareyour3dprints #dinsmoreinc
Dinsmore Inc. - @dinsmore_inc Instagram Profile - inst4gram.com
dinsmore_inc
2

Thanks for the amazing evening @medinnovationexchange and everyone who contributed to making the first MedTech Mega Mixer a success! We had a great time educating about how 3D Printing & Additive Manufacturing can be used in the Medical industry! #3d

Strawberry Farms Golf Club
Comments

@medinnovationexchange It was great having you there, and we appreciate the support!

@dinsmore_inc @medinnovationexchange looking forward to more great events 👍

Since the wax filiment didnt work out I'm going to melt it down and use it for injection molding.
.
.
.
#3dprinting #3ddesign #3dprints #3dprinted #3d #cad #cam #design #3dmodeling #mechanical #electrical #engineering #engineer #filament #prototype #cura #manufacturing #tech #gcode #future #additivemanufacturing 
#machinablewax #casting #molding #injectionmolding
Custom 3D Prints - @king.cad.nyc Instagram Profile - inst4gram.com
king.cad.nyc
1

Since the wax filiment didnt work out I'm going to melt it down and use it for injection molding. . . . #3dprinting #3ddesign #3dprints #3dprinted #3d #cad #cam #design #3dmodeling #mechanical #electrical #engineering #engineer #filament #prototype #

Comments

@unpredictablelab 🆒🆒

another ton of containers :D

#follow #picoftheday #tbt #igers #photooftheday #instagood #beautiful #bestoftheday #3d #3dprinted #3dprinter #3dprinting #pla #plaers #followme #thingiverse #filament #geeetech #anet #fablab #makers #maker#additivemanufacturing #box #printer #printed #3dprintinglife #printing
thing:612709 in @thingiverse
3D Printing - @3d_dd_ Instagram Profile - inst4gram.com
3d_dd_
3

another ton of containers :D #follow #picoftheday #tbt #igers #photooftheday #instagood #beautiful #bestoftheday #3d #3dprinted #3dprinter #3dprinting #pla #plaers #followme #thingiverse #filament #geeetech #anet #fablab #makers #maker #additivemanuf

Comments

@fabio.guelfi ❤️❤️❤️

@3d_learn You have some great shots in your gallery! I mean I liked them 😊

Our large gas management systems can purify and recirculate
Inert - @inertcorp Instagram Profile - inst4gram.com
inertcorp
0

Our large gas management systems can purify and recirculate

Testing the 0.25mm tool on the Nautilus and got some pretty tiny results! Learn more about the Nautilus and reserve yours at the link in our bio. @proto_pasta @fillamentum
HYDRA RESEARCH - @hydraresearch Instagram Profile - inst4gram.com
hydraresearch
3

Testing the 0.25mm tool on the Nautilus and got some pretty tiny results! Learn more about the Nautilus and reserve yours at the link in our bio. @proto_pasta @fillamentum

Portland, Oregon
Comments

@pasta_heidi Looks great! #protognome

@hydraresearch @pasta_heidi thanks!

Round soap dish. From a hyperbolic tiling (invariant d=6817). Shapeways Transparent Acrylic.

#3dprinting #mathematical #topological #geometrical #mathematicalart #jewelry #jewellery #mathematicaljewelry #jewelrydesign #gems #trendy #mathematicalmodels #shapewaysjewelry #shapeways #hyperbolic #hyperbolicgeometry #polytope #polyhedron #3dart #additivemanufacturing #3d #soapdish #soapdishes
MathArt, Hyperbolic Geometry - @3d_printed_jewellery Instagram Profile - inst4gram.com
3d_printed_jewellery
2

Round soap dish. From a hyperbolic tiling (invariant d=6817). Shapeways Transparent Acrylic. #3dprinting #mathematical #topological #geometrical #mathematicalart #jewelry #jewellery #mathematicaljewelry #jewelrydesign #gems #trendy #mathematicalmode

Comments

@luxury_jewelry19 I can’t decide that I liked this photo because of composition or place but it is really good✌️😍

@3d_printed_jewellery @luxury_jewelry19 😊Happy, happy, happy..., either way! 🙏